Experience is essential when it comes to hiring an asphalt paver company. You can find companies that have shiny new equipment and boast the most durable materials, however without the right experience to know when and how to perform the task, you will be running into difficulties. It doesn’t matter if you are paving your drive or whether you want to lay down layers for a commercial business, the process involves a variety of steps. Some of these steps may seem small, but they play an important role in ensuring the end result is satisfactory.
Step One: Prior to any paving company beginning any job, there is a need to prepare the area that will be paved. This includes clearing away debris such as leaves and branches. Once this is done, workers can begin to lay down the asphalt paving. Depending on the size of the job and the amount of work that needs to be done, this may take several hours to finish. A lot of time must be spent planning this out and getting the job done right.
Step Two: Once the area has been cleared, power walkers must be placed on either side of the sidewalk. These walkers are meant to help drivers and pedestrians make their way across the newly laid asphalt. They must also be kept in a downward position to aid in preventing the buildup of snow and ice on the sidewalks. In order for these steps to be properly performed, it is necessary for the workers to be aware of what they are doing at all times. Paving companies must be trained accordingly to ensure proper safety procedures are being followed and that all workers remain safe at all times.
Step Three: The workers must then proceed with positioning and leveling the pavement of the parking lot. Sometimes, parking lots have uneven floors which can create problems with the laying of the asphalt. Parking lots that are already built have very steep levels and they need to be carefully planned and leveled before laying the paving. Asphalt parking lot paving companies should be sure that all surfaces being used are completely level before starting the job. If any spots are not level, the workers will end up sinking into them which can be very dangerous and even fatal.
Steps Four: After the area has been cleared, the parking lot paving company must then get started on laying the base of the structure. This includes putting down the concrete and then pouring the base coat. Once this is done, it is time to move on to getting the masonry started. Many times masonry is not needed on this job because there is already a foundation that has been built.
Steps Five: Just as with the other types of paving, the asphalt driveways must also be prepared. Most often the concrete driveways are laid first because they are easier to do. However, some companies prefer asphalt pavements because they are more durable and they are more resistant to wear and tear. Asphalt paving company workers need to take extra precautions when handling these types of driveways because they are softer and can easily be damaged if a truck is slammed into them.
Steps Six: Once the asphalt has been poured and the base work has been prepared, it is time to move onto the second part of the project. The concrete pavers that will be used are very important because they help make the entire project look professional. It is critical that the contractor uses quality pavers in order to make sure that everything looks good. Some paving companies try to shortcut the process by using low-quality pavers. These low-quality pavers often have a poor design and they will not last for long.
Step Seven: Once the pavement job has been done right, the Paving Company will want to seal the area. This is done with a concrete sealer. There are many different sealers that a paving company can use; however, one of the most popular ones is Liquid Parcel. This sealer will not damage the area, it will not peel, and it can be removed and replaced whenever needed. The best thing about Liquid Parcel is that it does not require any extra labor on the behalf of the contractor.